Yamaha Robotics Industrial Robots and Controllers

Note 1 : It will be a customer’s choice.

Note 2 : Available only for the slave.

AC servo motor output (W)	100
Maximum speed (deg/sec)	360
Repeatability (sec)	+/-30
Maximum Allowable Moment lnertia (kgf, cm, sec²)	3.71 (0.36kg, m²)
Rated torque (kg, m)	1.10
Speed reduction ratio	1/50
Rotation range (deg)	360
Cable length (m)	3.5 (Standard), 5, 10
Controller	SR1-X-05
Robot driver	RDX-05-RBR1

Weight paramerter W (kg)	1	2	3	4	5	6	7	8	9	10
Maximum allowable moment inertia J (kgf, cm, sec2)	0.25	0.49	0.74	0.99	1.24	1.48	1.73	1.98	2.23	2.47

Weight paramerter W (kg)	11	12	13	14	15
Maximum allowable moment inertia J (kgf, cm, sec2)	2.72	2.97	3.22	3.46	3.71

Note :
When the weight of the tool and work installed to the shaft of R10 is Wkg, adjust so that its inertia moment value J is smaller than that in the above table. If it exceeds that value, enter the corresponding value in the above table.
(Example: When W is 3kg and J is 0.48kgf, cm, sec², enter 4kg.)

Drawing PDF Data. File Name: "catalog.pdf" Approx.40kbyte